User's Guide

Mod: MDM/011/M4 Rev 2
IDS GeoRadar User Guide QGG/2021/001 Rev. 1.4
7. Care and Transport
In the present section information for IBIS KU ETH system maintenance are provided. For further details
please contact IDS GeoRadar Customer Care.
All maintenance operations need to be performed with the system stopped and disconnected from the power
source. Different behavior can lead to injuries due to mechanical or electrical hazards. For each check refer
to the system manual, however particular attention must be taken in verifying the following (but not limited
to):
➢ Check that the sensor is well tightened to the system installation bracket
➢ Visually check the integrity of the antennas and the sensors case
➢ Visually check that all the connectors, are well fastened and intact.
➢ Visually check the integrity of all the cables and cable pins.