User's Guide

Mod: MDM/011/M4 Rev 2
IDS GeoRadar User Guide QGG/2021/001 Rev. 1.4
The operations to be performed on the sensor for installation on the system will be:
• Fixing to the system using the appropriate fixing points
• Connection to the multipolar connector of the power and sync. cable present on the system
• Connection to the RJ45 Ethernet connector of the data cable present on the system
The sensors is delivered typically with antennas mounted, otherwise connect the antennas to the waveguides
using appropriate screws.
Fig. 3 – Example of antennas with screw
The operations of installation must follow the procedures reported in the system user manual.