User's Guide

Mod: MDM/011/M4 Rev 2
IDS GeoRadar User Guide QGG/2021/001 Rev. 1.4
The unit contain all the parts for the generation, transmission, reception and acquisition of the radar signal. It
features the following interfaces:
• 1 - ETH RJ45 connector on the rear of the box;
• 1 - 23 pole Male connector to provide power and sync. On the rear of the box;
• 2 - waveguide WR62 (4 - in MIMO configuration) for the antennas on the front of the box
• 4 - fixing point (M5) on the bottom of the box
• 1 - central point that it is used to fix the centering cylinder or the hexagonal head for the tripod
Fig. 2 – IBIS KU ETH rear, front and bottom view