Technical Manual

IDS Ingegneria Dei Sistemi S.p.A.
N doc:MN/2011/004 - Rev. 1.1
15 / 19
Tutte le informazioni sono di proprietà IDS. Tutti i diritti riservati.
All information contained in this document is property of IDS. All rights reserved
Fig. 2-3 – Particular of the brackets to fix frame B to frame A
3. Remove the 2 caps from the horizontal frame (B) limbs; then insert embossed
fiberglass frame (C) into the internal grooves of B until the end. Finally screw
both screws for side of B and insert again the caps (see Fig. 2-4, Fig. 2-5, Fig. 2-6
and Fig. 2-7).
Fig. 2-4 – Embossed Fiberglass frame (C)
Fig. 2-5 – Attaching frame C to frame B
BRACKETS OF CONNECTION
BETWEEEN HORIZONTAL
AND VERTICAL FRAME