User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/056 - Rev. 1.0
RIS Hi-Mod - Installation Guide and User Manual
30 / 41
In the four antennas configuration you have four antenna cables. To make a
cascade connection between the antennas you have to link the longer cable from
the ANT1/CHAIN port of the DAD unit to the IN port of the leftmost antenna; use
the three short cable to link OUT and IN ports of each adjacent antenna (Fig.
1-29).
Fig. 1-30 shows the complete four antenna configuration.
Fig. 1-29 – Antenna cables
Fig. 1-30 – Four antennas configuration
You can find more info about the DAD unit and its cable connectors in Chapter 2:
The DAD control unit.