User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/056 - Rev. 1.0
RIS Hi-Mod - Installation Guide and User Manual
29 / 41
1.4 Four antennas equipment and configuration
Fig. 1-28 shows you the equipment you will receive for your four antennas
configuration. The equipment is composed of:
• A Rudder
• Four Wheeled frames (two of them with battery bags)
• Three non-Wheeled frames (two of them with metallic lock devices)
• Eight Junction pipes
• Four Antennas and their cables (three short, one long)
• Two Batteries and their cable
• DAD control unit
• LAN cable.
Fig. 1-28 - Equipment provided for the four antennas configuration
1.4.1 Assemblage instructions
First of all follow the instruction to set the system in the two antennas
configuration (see Par 1.2.1). Then build and place the two side frames as
described in Par. 1.3.1 . Finally insert the third and forth antenna in the side frames.
1.4.2 Wiring
Battery, wheel and LAN cables are linked to the DAD control unit as in the mono
antenna configuration (see Par 1.1.2 for further instruction).
Rudder
Antenna
cables
Antennas
Batteries &
DAD control
unit
Non
-
wheeled
frames
Battery and
LAN cables
Junction pipes
Wheeled
frames