User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/056 - Rev. 1.0
RIS Hi-Mod - Installation Guide and User Manual
25 / 41
1.3 Three antennas equipment and configuration
Fig. 1-21 shows you the equipment you will receive for your three antennas
configuration. The equipment is composed of:
• A Rudder
• Four Wheeled frames (two of them with battery bags)
• Two non-Wheeled frames
• Six Junction pipes
• Three Antennas and their cables (two short, one long)
• Two Batteries and their cable
• DAD control unit
• LAN cable
Fig. 1-21 - Equipment provided for the three antennas configuration
1.3.1 Assemblage instructions
First you must set the system in its mono antenna configuration (see Par 1.1.1),
then you have to build the frames for the antennas on the side. Equipment needed
for the side frames is shown in Fig. 1-22.
Antenna
cables
Rudder
Batteries &
DAD
Non
-
wheeled
frames
Wheeled
frames
Antennas
Battery &
LAN cables
Junction
pipes