User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/056 - Rev. 1.0

RIS Hi-Mod - Installation Guide and User Manual

Fig. 1-14 – Two antennas rudder configuration

To build the frame carrying the antennas you need the equipment shown in Fig.

1-15.

Fig. 1-15 – Two Antennas frame equipment

Take one of the wheeled frames and screw two junction pipes in it. Connect these

pipes with the non-wheeled frame (the white spots on it show you which side goes

down). Link the other two junction pipes and finally close the box with the other

wheeled frame.

Fig. 1-16 shows you how to build the box.

Now take the rudder and put it in the metallic junctions of the wheeled frames. Be

sure to lock it with the knobs showed in Fig. 1-17.

The locking devices are the two knobs with a little button in their centres: you

have to push it , insert the knob in place and then release it.