User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/056 - Rev. 1.0
RIS Hi-Mod - Installation Guide and User Manual
20 / 41
1.2 Two antennas equipment and configuration
Fig. 1-13 shows you the equipment you will receive for your two antennas
configuration. The equipment is composed of:
• A Rudder
• Two Wheeled frames
• One non-Wheeled frame
• Four Junction pipes
• Two Antennas and their cables (one short, one long)
• Two Batteries and their cable
• DAD control unit
• LAN cable
Fig. 1-13 – Equipment provided for the two antennas configuration
1.2.1 Assemblage instructions
First you have to set the rudder in its two antennas setting. The rudder has two free
bars and four knobs (Fig. 1-2). The bigger ones must be screwed in vertically to
block the free bars in place while the little ones can be screwed in two different
position: if placed on the inside part of the frame you will get the mono or three
antenna configuration (Fig. 1-3); if placed on the external part of the frame you
will get the two or four antenna configuration (Fig. 1-14).
Rudder
Wheeled
frames
Antennas
Junction
Pipes
Non
-
wheeled
frame
DAD unit &
Batteries
Battery &
LAN cables
Antenna
cables