User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/056 - Rev. 1.0

RIS Hi-Mod - Installation Guide and User Manual

1.1.2 Wiring

Once the DAD unit is in place you have to connect it with the metric wheel, the

antenna, the battery and your laptop.

The metric wheel cable is located on one of the wheel frames. Let it pass through

the black strip on the rudder until you reach the first ferrite then link the connector

with the

Wheel

port of the DAD unit (Fig. 1-10).

Fig. 1-10 – Metric wheel cable

Take the Antenna cable and link the IN port of the antenna box with the

ANT1/CHAIN port of the DAD unit (Fig. 1-11).

Fig. 1-11 – Antenna cable in place