User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/056 - Rev. 1.0
RIS Hi-Mod - Installation Guide and User Manual
17 / 41
Take the antenna and make it slide in the frame from behind. R emember to put
and remove the antenna always from the rear part of the frame. When the antenna
is in place lock it around the two junction pipes using its four hooks (Fig. 1-8).
Fig. 1-8 – Insertion of the antenna and close up of the hook
Finally put the DAD Control unit inside the box in the middle of the rudder (Fig.
1-9) and the battery in one of the two small black bags.
Fig. 1-9 – Insertion of the DAD Control Unit and battery