User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/056 - Rev. 1.0

RIS Hi-Mod - Installation Guide and User Manual

Now you have to build the frame carrying the antenna: you will need the

equipment shown in Fig. 1-4. Take one of the wheel frame and screw the two

junction pipes in it, then close the frame with the other wheel part (Fig. 1-5).

Fig. 1-4 – Antenna frame equipment

Fig. 1-5 – Junction pipes in position and closed frame

Place the rudder into the metallic junctions of the wheel frame as shown in Fig.

1-6 then insert the two locking devices shown in Fig. 1-7 in the metallic junctions.

The locking devices are the two knobs with a little button in their centres: you

have to push it , insert the knob in place and then release it.