User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/056 - Rev. 1.0
RIS Hi-Mod - Installation Guide and User Manual
14 / 41
1.1.1 Assemblage instructions
First you have to set the rudder in its mono antenna setting. The rudder has two
free bars and four knobs (Fig. 1-2). The bigger ones must be screwed in vertically
to block the free bars in place while the little ones can be screwed in two different
position: if placed on the inside part of the frame you will get the mono or three
antenna configuration (Fig. 1-3); if placed on the external part of the frame you
will get the two or four antenna configuration (Fig. 1-14).
Fig. 1-2 – Rudder in mono antenna configuration
Fig. 1-3 – Rudder knobs: bigger one on the left, smaller one on the right