User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N doc: MN/2009/028 - Rev. 1.1
DETECTOR DUO SYSTEM User manual
74
/
74
All information contained in this document is property of IDS. All rights reserved
The most important types of utilities (which may be managed by
different agencies) to be considered are:
Public Street Lighting
Low, Medium and High Voltage Electricity Cables
Water supply
Gas
Telephone Cables
Sewers
Even though they may be very generic, these maps represent an
important support during the extraction and data interpretation phases,
since they give the user a first idea, if not an exhaustive one, of the
utilities that are present.
For this reason, it is important that the user activates the procedures
for obtaining these maps well in advance to make sure that they will
be available during the data extraction phase.
APPENDIX C - OPENING MANHOLES
This phase is normally performed once the acquisition phase has been
completed, and consists in opening the manholes present in the
investigated site.
The data regarding the depth, diameter, and direction of the utility
should be saved on the work sheet: this will provide you with further
reference data during the interpretation phase, and will allow
propagation velocity estimates to be performed in order to calculate
the depth of the identified utility as precisely as possible.