User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N doc: MN/2009/028 - Rev. 1.1

DETECTOR DUO SYSTEM – User manual

NOTE

In both

cases, you have to select one of the icons shown in

Fig. 5.21

to confirm the depth of the identified pipe. This

operation

can be repeated several times during the

acquisition: a symbol will appear at calibration points

describing the type of the characteristics of the detected

pipe



Press the button to finish the scan while remaining in

the open survey.



Press the button to save the scan file onto the computer

hard disk (in the C:\DetectorDuo\Mission directory); you can

continue the same scan by moving the trolley in the same

direction.



Press the button to finish the scan and go back to the

main menu shown in Fig. 5.14 to choose a new survey..

5.4.5 Post-acquisition commands

The following commands can be activated from the

ACQUISITION

SELECTION

window (see Fig. 5.14):

1. ;

2. ;

3. ;