User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N doc: MN/2009/028 - Rev. 1.1
DETECTOR DUO SYSTEM – User manual
53 / 74
All information contained in this document is property of IDS. All rights reserved
Fig. 5.21 – Icons for types of pipes and cables
 By pressing the button, you can remove a previously
selected marker.
!
NOTE
The system can’t identify the types of pipe or cable. This
information can be found from other sources, such as
opening manhole covers or consulting technical maps.
5.4.3.2 Acquisition for mapping
In this second case, select the button (Fig. 5.15)
to set the starting point coordinate al fine; the window shown in
Fig. 5.23 automatically opens.
You then have the chance to choose the following acquisition
parameters:
• The acquisition direction as either Longitudinal or
Transversal. When filling in this field, remember that
Longitudinal ( L ) means the scans is performed parallel to
the zero reference line (T axis), while a scan
perpendicular to this line is called a Transversal scan ( T )
(See figure Fig. 5.22).