User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N doc: MN/2009/028 - Rev. 1.1
DETECTOR DUO SYSTEM – User manual
49 / 74
All information contained in this document is property of IDS. All rights reserved
Fig. 5.16 – Radar map during the acquisition phase
 During the acquisition, the user can also change the contrast
value in real time, through the function
editing the number in the side textbox, as shown in Fig. 5.16.
 If you note the appearance of a hyperbola on the screen during
acquisition (generated by a buried pipe or cable), go back,
moving the trolley in the opposite direction to the acquisition
direction. This temporarily suspends acquisition and produces a
vertical line on the data screen (see Fig. 5.17).