User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N doc: MN/2009/028 - Rev. 1.1
DETECTOR DUO SYSTEM – User manual
46 / 74
All information contained in this document is property of IDS. All rights reserved
5.4.3 Commands used during acquisition
Data acquisition is started using the window shown in Fig. 5.14.
Fig. 5.14 –ACQUISITION SELEC TION window
 Press the button to go back to the pre-acquisition
phase.
 Press the button to close the software.
 To start a new acquisition, write a name in the text box then
press the button next to it
.
This will open the window shown in Fig. 5.15.