User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N doc: MN/2009/028 - Rev. 1.1
DETECTOR DUO SYSTEM – User manual
45 / 74
All information contained in this document is property of IDS. All rights reserved
1. Wheel setting here you can set the acquisition mode of the system,
which can be either
a. Wheel driven field selected, in this mode, the radar
acquisition is set using the position sensor
b. If the wheel is not used, you can set the radar acquisition to
be performed under a constant time regime; the value
inserted in the Auto Stacking field indicates the number of
sweeps averaged during the acquisition phase.
2. The Ground type field enables you to activate the Rough terrain
option if it is necessary. When this option is activated, the radar
data are temporarily saved on the selected Device during the
acquisition phase. You can even select an external Device such as a
flash memory to temporarily save the data during the acquisition
phases. This option is recommended when the ground conditions
are particularly rough, and when you may find that saving the data
during the acquisition phase becomes critical due to the high
number of vibrations in the system.
3. In the Measure unit field, you can choose the measurement units to
be applied to the radar map visualized in real time. The alternatives
are m/cm and foot/inch
4. In the Swap axis field, you have the choice of modifying the
vertical scale of the radar map by setting the value in m or nsec
5. In the Gain application field, you can choose to view the radar
map acquired in real time with or without gain applied
6. In the Background removal field you can set the Clear_x
application for the acquired radar maps.
7. Language this permits you to change the language used on the
software interface amongst those available (e.g. ITA = Italian, Eng
= English).