User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N doc: MN/2009/028 - Rev. 1.1
DETECTOR DUO SYSTEM – User manual
42 / 74
All information contained in this document is property of IDS. All rights reserved
Fig. 5.11 – Initializing window
5.4.2 Pre-acquisition commands
 Pressing the button activates the calibration
procedure of the processing parameters used on the acquired
data.
 To perform this calibration, push the trolley a few meters then
press the button to save the parameters the software
automatically calculates (see Fig. 5.12).
!
NOTE
Calibration can be repeated as often as required during a
survey, whenever the ground conditions change.