User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N doc: MN/2009/028 - Rev. 1.1
DETECTOR DUO SYSTEM – User manual
39 / 74
All information contained in this document is property of IDS. All rights reserved
Fig. 5.8 – Selecting the Ethernet card (TCP/IP)
 Select Internet Protocol (TCP/IP) from the list of components
(in the general menu) with the left mouse button (see Fig. 5.8).
 Select the Properties command .
 The window shown in Fig. 5.9 appears, in which you have to
select Use the following IP address.
 Write the following number in the IP address field: 192 . 168 .
200 . 199.
 Write the following number in the Subnet mask field: 255 . 255 .
255 . 0.
 Press OK to confirm the changes
!
NOT E
Check that the DetectorDuo directory is copied into the C:\
drive and is not write protecting, otherwise the DetectorDuo
SW will not function correctly.