User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N doc: MN/2009/028 - Rev. 1.1
DETECTOR DUO SYSTEM – User manual
29 / 74
All information contained in this document is property of IDS. All rights reserved
4.2.4 Connecting the position sensor
Fig. 4.11 – Connecting the position sensor
 The system position sensor is situated inside one of the trolley
wheels and turns in unison with it (Fig. 4.11).
 The sensor measures all movements of the Detector Duo from
its starting point, which coincides with the system centerpoint
(which is the center of the antenna).
 The sensor cable has to be connected to the WHEEL port (1) on
the Control Unit .
4.2.5 Removing the trolley wheels
 If the wheels need to be removed for storage, press the black
button labelled PRESS (indicated by the arrow) to the side of
the wheel and pull the wheel outwards.
 To reinsert the wheel onto the axis, it is sufficient to push it into
the support until the automatic block clicks into place (Fig.
4.12)
1