User's Manual
IDS Ingegneria Dei Sistemi S.p.A. N doc: MN/2009/028 - Rev. 1.1
DETECTOR DUO SYSTEM – User manual
18
/
74
All information contained in this document is property of IDS. All rights reserved
3.1.1 The Detector Duo Control Unit
The control unit has the following main functions:
To communicate with the antenna.
To communicate with the notebook computer.
To pilot the position sensor.
The control unit (Fig. 3.2) is fitted with the following connection
ports:
Position sensor port (4): the position sensor is connected to the
control unit using the specific cable. This port is marked as
WHEEL.
Fig. 3.2 – The Control Unit
Antenna port (3): using the cable shown in Fig. 3.3, this
connects the Control Unit to the antenna. It is marked as ANT.1.
Fig. 3.3 – The Antenna-Control Unit connection cable
4
3
2 1
5