User's Manual
IDS Ingegneria Dei Sistemi S.p.A. N doc: MN/2009/028 - Rev. 1.1
DETECTOR DUO SYSTEM – User manual
15
/
74
All information contained in this document is property of IDS. All rights reserved
Data processing: this is applied to the raw data to permit the acquired
sections to be viewed in a comprehensible way.
Field survey: a group of field acquisitions relating to a single survey.
Handle: a extractable handle is gripped by the operator to move the
antenna trolley.
Maps: graphics showing the change in received radar signal (signal
intensity in gray scale) with respect to the scanning direction.
Position sensor: a distance measurement device fixed inside one of
the trolley wheels, which constantly signals the distance travelled from
the start of the scan back to the Control Unit .
Raw data: unprocessed data obtained during a field survey.
Receiver : part of the antenna dedicated to detecting the signals. It is
lodged in the same container as the transmitter.
Scan: a single movement of the antenna trolley from the beginning to
the end of a pre-established path
Setup: initialization of a piece of equipment or a software process.
Survey: the name given to a collection of scans, which together cover
all the areas of a large investigation: typically an entire town or a large
urban area
Transmitter: part of the antenna dedicated to emitting the radar
signals. It is lodged in the same container as the receiver.
Utilities: the objects the Detector Duo searches for, i.e. pipes
supplying gas and water, electricity cables, etc.