User's Manual

APPENDIX A. Disclaimer

IDS GeoRadar s.r.l. MN/2016/011 Rev 1.0 Draft 22/ 36

onnecting the electric engine batteries (optional, red arrows)

Fig. 4.14 – connectors of the electric engine batteries

Mounting the hauling kit (optional) 4.6

An optional hauling system is also available with Stream-C. The system is

operated by hooking one end of the hauling system (part “A” of Fig. 4.15)

to the vehicle, and joining the opposite end to the frame of the pivoting

wheel of the frame (“B” in Fig. 4.15). In this case, the handle must be in

folded position, as shown in Fig. 4.15, and the height of the system is

adjusted through a remote control connected to the end side on the handle

(the same connector used for operating the electric engine) (“C” in Fig.

4.15).

Fig. 4.15 – mounting the hauling system