User's Manual

APPENDIX A. Disclaimer
IDS GeoRadar s.r.l. MN/2016/011 Rev 1.0 Draft 16/ 36
Fig. 3.20 – Electric Engine command
Assembly procedure 4
The procedure to assemble the Stream-C is very simple and can be
performed by one person.
To assemble the system follow these steps:
1. Unfolding the radar main body (Par. 4.1);
2. Connecting the antenna (Par. 4.2)
3. Connecting the battery (Par. 4.3)
4. Connecting the laptop (Par 4.4);
5. Connecting the Electric Engine battery (Optional, Par. 4.5);
6. Mounting the Hauling kit support (optional, Par. 4.6);
7. Mounting the GPS support (optional, Par. 4.7.
Unfold the radar main body 4.1
To unfold the Stream-C main body place it to on the ground, press the
central handle button and raise the rudder to the desired angle (Fig. 4.1).