User's Manual

AM200 – Ver. 1.0 – User Manual
Mod: MDM/011/M2 Rev 6
IDS GeoRadar Srl User Manual MNG/2020/002 Rev. 1.0 5/ 17
3 SAFETY DIRECTIONS
3.1 Description
The following directions enable the person responsible for the product, and
the person who uses the equipment, to anticipate and avoid operational
hazards.
The person responsible for the product must ensure that all users understand
these directions and adhere to them.
3.2 Definition of Use
The intended use is geophysical surveying in the context of civil engineering
applications.
3.3 Reasonably Foreseeable Misuse
• Use of the product without instruction.
• Use outside of the intended use and limits.
• Opening the product using tools, for example screwdriver, unless
this is permitted for certain functions.
• Modification or conversion of the product.
• Use after misappropriation.
• Use of products with obvious damages or defects.
• Use with accessories from other manufacturers without the prior
explicit approval of IDS GeoRadar s.r.l
• Inadequate safeguards at the working site.
3.4 Limits of Use
Environment: Suitable for use in an atmosphere appropriate for permanent
human habitation. Not suitable for use in explosive environments.
DANGER: Local safety authorities and safety experts must be
contacted before working in hazardous areas, or close to
electrical installations or similar situations by the person in
charge of the product.
3.5 Responsibilities
Manufacturer of the product - IDS GeoRadar s.r.l. is responsible for
supplying the product, including the user manual and original accessories,
in a safe condition.
Person responsible for the product - The person responsible for the product
has the following duties:
• To understand the safety instructions on the product and the
instructions in the user manual.
• To ensure that it is used in accordance with the instructions.
• To be familiar with local regulations relating to safety and
accident prevention.
• To inform IDS GeoRadar s.r.l. immediately if the product and
the application becomes unsafe.
• To ensure that the national laws, regulations and conditions for
the operation of electromagnetics transmitters are respected.