AM200 Version 1.0 User Manual IDS Geo Radar Srl MNG/2020/002 Rev. 1.
AM200 – Ver. 1.0 – User Manual Mod: MDM/011/M2 Rev 6 Legal Notices Use of the Manual This Manual is intended to be used solely by authorized user of IDS GeoRadar Systems. It is specific for internal business purpose only. If you are not an authorized user, you are NOT allowed to read this Manual and you must return it to IDS GeoRadar as soon as possible. Access to and use of this Manual is also provided subject to the acceptance of the Disclaimer set out below.
AM200 – Ver. 1.0 – User Manual Mod: MDM/011/M2 Rev 6 INDEX 1 INTRODUCTION .............................................................................................................................................................................................................................. 3 1.1 Purpose ......................................................................................................................................................................................................
AM200 – Ver. 1.0 – User Manual Mod: MDM/011/M2 Rev 6 1 INTRODUCTION 1.1 Purpose This guide describes the procedures to assemble each part of the AM200 GPR unit. This is intended to be a quick assembly reference guide, that helps you during transfer from the office to the jobsite. 1.2 Intended readership The intended reader of this manual should be the technician in charge of using the system that has undergone the IDS GeoRadar training for AM200. IDS GeoRadar Srl User Manual MNG/2020/002 Rev. 1.
AM200 – Ver. 1.0 – User Manual Mod: MDM/011/M2 Rev 6 2 HOW TO READ THE MANUAL 2.1 Manual Layout This manual is meant to be a quick assembly reference guide, that helps you during transfer from the office to the jobsite, for the AM200 GPR unit. 2.2 SYMBOLS Warning messages are an essential part of the Safety Concept of the instrument. They appear wherever hazards or hazardous situations can occur.
AM200 – Ver. 1.0 – User Manual Mod: MDM/011/M2 Rev 6 3 SAFETY DIRECTIONS DANGER: Local safety authorities and safety experts must be contacted before working in hazardous areas, or close to electrical installations or similar situations by the person in charge of the product. 3.1 Description The following directions enable the person responsible for the product, and the person who uses the equipment, to anticipate and avoid operational hazards.
AM200 – Ver. 1.0 – User Manual Mod: MDM/011/M2 Rev 6 3.6 Hazard of use NOTICE: Watch out for erroneous measurement results if the product has been dropped or has been misused, modified, stored for long periods or transported. Precautions: Periodically carry out test measurements and perform the field adjustments indicated in the user manual, particularly after the product has been subjected to abnormal use and before and after of important measurements.
AM200 – Ver. 1.0 – User Manual Mod: MDM/011/M2 Rev 6 NOTICE: If the product is improperly disposed of, the following can happen: • If polymer parts are burnt, poisonous gases are produced which may impair health. • If batteries are damaged or are heated strongly, they can explode and cause poisoning, burning, corrosion or environmental contamination.
AM200 – Ver. 1.0 – User Manual Mod: MDM/011/M2 Rev 6 4 HOW TO ASSEMBLE AM200 AM200 GPR unit doesn’t need any set-up or assembly. It appears as shown in Fig. 1, Fig. 2 and Fig. 3. Fig. 2 – AM200 GPR unit Fig. 1 – AM200 GPR unit Fig. 3 - AM200 GPR unit IDS GeoRadar Srl User Manual MNG/2020/002 Rev. 1.
AM200 – Ver. 1.0 – User Manual Mod: MDM/011/M2 Rev 6 5 HOW TO OPERATE AM200 GPR unit On top of the cover of the AM200 GPR antenna unit there are 3 external connectors and 1 button (Fig. 4): • IN: 19 pin multipolar connector, providing power supply and Ethernet connectivity. • OUT: 19 pin multipolar connector, providing power supply and Ethernet connectivity towards other AM200 modules. • WHEEL: 4 pin connector, compatible with IDS Georadar’s survey kit.
AM200 – Ver. 1.0 – User Manual Mod: MDM/011/M2 Rev 6 6 12V lead battery Power ON Battery cable Junction box Ethernet cable Fig. 6 - Connection of AM200 GPR unit 5. Press the power on button. 6. Operate the GPR unit, with the use of provided IDS Georadar’s software, according the survey the user intends to perform (please, refer to specific software product User Manual). IDS GeoRadar Srl TECHNICAL SPECIFICATIONS Data Measure Size 333 mm x 433 mm x 142 mm (h) Weight 3.
AM200 – Ver. 1.0 – User Manual Mod: MDM/011/M2 Rev 6 7 CARE AND TRANSPORT 7.2 Battery Removal Information 7.1 Cleaning Information IDS GeoRadar Srl User Manual MNG/2020/002 Rev. 1.
AM200 – Ver. 1.0 – User Manual Mod: MDM/011/M2 Rev 6 o APPENDIX A DISCLAIMER 1. That, if IDS GeoRadar s.r.l. requires that Buyer/User shall carry out a training with reference to some Product categories, no operation or use of the Products shall be started before its designated Operator/s has got the User Certificate, as defined by IDS GeoRadar s.r.l. specific procedure which the Buyer confirms to know and accept. Generals.
AM200 – Ver. 1.0 – User Manual Mod: MDM/011/M2 Rev 6 d. Unauthorized changes and additions to the Products. e. Use of the Products connected to suspected non-working equipment or with equipment (mainly PC) having characteristics not in compliance with the required specifications of IDS GeoRadar s.r.l. not expressly authorized by IDS GeoRadar s.r.l.; f. Poor or faulty operation of the electrical and telecommunication networks not directly managed by IDS GeoRadar s.r.l. or its delegates. g.
AM200 – Ver. 1.0 – User Manual Mod: MDM/011/M2 Rev 6 APPENDIX B IMPORTANT NOTICE FOR THE US CUSTOMER Frequency Coordination Branch., OET Federal Communications Commission FCC ID: UFW-AM200 445 12th Street, SW This device complies with part 15 of the FCC Rules: Washington, D.C. 20554 Operation is subject to the following conditions: ATTN: UWB Coordination 1. This device may not cause harmful interference, and 2.
AM200 – Ver. 1.0 – User Manual Mod: MDM/011/M2 Rev 6 APPENDIX C – IMPORTANT NOTICE FOR CANADIAN CUSTOMER Canadian Requirements of RSS-220 for Ground Antennas IMPORTANT NOTE FOR THE CANADIAN CUSTOMERS IC Certification Number: 8991A-AM200 This device complies with the requirements of IC Standard RSS-220 This Ground Penetrating Radar Device shall be operated only when in contact with or within 1 m of the ground.
AM200 – Ver. 1.0 – User Manual Mod: MDM/011/M2 Rev 6 APPENDIX D CUSTOMER SUPPORT The IDS GeoRadar Technical Support team is available to answer any question about: • general enquiries • request of advertising material • technical issues • any other business • As well as listening to your suggestions too. Please, feel free to contact us sending an e-mail to: support.geo@idsgeoradar.com Or call the Number: +39 050 8934 200 Customer Care Office Address: IDS GeoRadar srl A.
