User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2005/038 - Rev. 1.2
“ALADDIN SK2 ” STRUCTURE KIT User
Manual
31 / 32
Fig. 4-13 – Features of PSG and slide
Follow the same operative procedure used in the "Manual" procedure
described above.
NOTE! The main difference with respect to the "Manual" mode consists
in the absence of the Tolerance control factor, therefore you are
free to choose how long the scan should be (Length). This mode
is useful when scan
s of different lengths have to
be performed. This is the only mode in which the user can work
with the optical detector deactivated.
WARNI NG!
Once the scans are finished, you can activate the
Review Acquisition
button (see Par. 4.7 in manual
MN_2004_005); this opens the window shown in Fig. 4-
12, from where pressing the Gred3D button (circled in red),
you can automatically start the GRED 3D NAVIGATOR
SW for the survey underway. The GRED 3D
NAVIGATOR SW can be used to process the raw data as
required.
For information on the GRED 3D NAVIGATOR
SW, see the user manual MN_2005_002.