User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2005/038 - Rev. 1.2
“ALADDIN SK2 ” STRUCTURE KIT User
Manual
26 / 32
Fig. 4-7 – Aladdin System
NO TE!
The pad consists of a grid of longitudinal and transversal lines
that indicate the profiles to be traced using the antenna. In
addition, there is a black square at the bottom right hand corner
which represents the antenna
parking area, containing an optical
detector that temporarily deactivates the acoustic signal.
Step 2: Start the K2 SW, perform the calibration (as described in Par.
4.2 and 4.3 of MN_2004_005) and set the Aladdin structures kit
parameters (as described in Par. 4.1 of this manual).
NO TE!
If you are using a bipolar antenna, only longitudinal scans must
be performed; for a single high frequency antenna, perform both
longitudinal and transversal scans