User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2005/038 - Rev. 1.2
“ALADDIN SK2 ” STRUCTURE KIT User
Manual
25 / 32
is exceeded, the software forces you to repeat the pass
being performed.
You also have the option of calling up the virtual keyboard by pressing
the button shown in Fig. 4-3.
To confirm all the set parameters, press the OK button in the window
shown in Fig. 4-3.
Confirmation that Aladdin has been activated is given in the initial K2
SW window, with ALADDIN shown under the other lights (circled in
Fig. 4-6 in red) accompanied with three of its own lights which
simulate the three infrared sensors that make up the optical reader.
Fig. 4-6 – Initial K2 SW window when using the Aladdin structures kit
4.2 Work procedure using the Aladdin system
4.2.1 "Automatic" mode
Step 1: Assemble the system (see Fig. 4-7), and place the pad on the
surface to be investigated (Fig. 4-8).