User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2005/038 - Rev. 1.2
“ALADDIN SK2 ” STRUCTURE KIT User
Manual
23 / 32
Step 4 Click on the COM Settings button. This will open the window
shown in Fig. 4-4, from where you just have to select the Com port
number you have used to connect the kit to the structure, then press the
OK button
Fig. 4-4 – Com settings Window
Step 5 Use the Aladdin field shown in the window in Fig. 4-3 to set
the acquisition parameters to be used with the structures kit (see Fig.
4-5):
Fig. 4-5 – Aladdin Field