User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2005/038 - Rev. 1.2
“ALADDIN SK2 ” STRUCTURE KIT User
Manual
15 / 32
3.2.4 How to assemble the fork and the handle on the frame
• In order to assemble the handle it’s necessary to insert the
fork at the end of the handle in the point indicated in Fig.
3-13 and then screw the nut.
• Then connect the fork of the handle to the frame making
pressure on the two white lateral nuts up to link them.
Fig. 3-13 – Assembly of the handle to the frame
3.3 Cable connection of the system
3.3.1 Complete list of cables
The following list contains all the structures kit cables and how they
are connected:
 Fixed connection between the bipolar antenna trigger box (Fig.
3-14);