User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2005/038 - Rev. 1.2
“ALADDIN SK2 ” STRUCTURE KIT User
Manual
14 / 32
3.2.2 How to assemble the metric wheel to the frame
• Screw the central nut of the metric wheel in the lateral hole
located on the frame, keeping the wheel in vertical position (see
Fig. 3-11).
Fig. 3-11 – Assembly of the metric wheel on the frame
3.2.3 Assembly of the slide on the frame
• Put the slide under the antenna fitting the two lateral holes
located on the front and back side of the antenna as indicated in
Fig. 3-12. The slide holds a special film PSG type (Pad Survey
Guide) in order to use it only in combination with the PSG
carpet (see Par 4.2.3).
• Screw the four nuts to the relative holes.
Fig. 3-12 – Assembly of the slide on the frame