User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2005/038 - Rev. 1.2
“ALADDIN SK2 ” STRUCTURE KIT User
Manual
10 / 32
 Undo the Velcro that keeps the DAD unit blocked, now remove
the DAD and the trolley (Fig. 3-3).
Fig. 3-3 – Removing the DAD and the antenna trolley
 Remove the bipolar antenna, pushing the lever towards the foam
support then lift the antenna out rotating it s lightly (see the
direction of the red arrow in Fig. 3-4); when you have to replace
the antenna in the case, be careful that the white pegs on the side
of the antenna are blocked into the two holes inside the case
(indicated with the red circle).
.
Fig. 3-4 – Removing the bi polar antenna
 Open the bottom section (Fig. 3-4 and Fig. 3-5); this is the PC
storage area; if a PC has not been supplied with your order, you
can store your own PC here using the pre-cut foam to model a
suitably shaped space (Fig. 3-5). The maxim space available for
storing a PC is 34cm x 27cm x 5cm