User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/061 - Rev. 1.1

“ALADDIN” STRUCTURE KIT User

Manual

Fig. 4-5 – Aladdin system

Step 2: Start the K2 SW, perform the calibration and set the Aladdin

structures kit parameters.

NOTE!

Using a bipolar antenna, only longitudinal scans must be

performed; for a single high frequency antenna, perform both

longitudinal and transversal scans

Step 3: Position the antenna on the initial preset coordinate in the L

(or T) direction and carefully position the antenna until the acoustic

signal stops.

Step 4A (Standard System): Press one of the START buttons placed

on the handle or directly on the antenna ; a special acoustic signal will

confirm that the START button has been pressed.

Step 4B (US System): Press one of the START buttons placed on the

handle or directly on the antenna and keep it pressed; a special

acoustic signal will confirm that the START button has been pressed.

Releasing the button, will stop the collection after 10 sec.