User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/061 - Rev. 1.1
“ALADDIN” STRUCTURE KIT User
Manual
27 / 32
Fig. 4-2 – External device settings command
4.2 Functioning principles using the PSG carpet
Step 1 click once with the left mouse button on the “K2” icon on the
blue bar of the initial K2 SW window (see Fig. 4-1), the menu that
appears contains a series of commands, from which you should select
External device settings (see Fig. 4-2).
Step 2 this opens the window shown in Fig. 4-3, from where you can
select Aladdin PSG from the External device type field if you are
going to use the PSG carpet.
Fig. 4-3 – Selection window for Aladdin PSG mode