User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/061 - Rev. 1.1
“ALADDIN” STRUCTURE KIT User
Manual
23 / 32
Fig. 3-14 – Fixed connection cable between the bipolar antenna and
DAD
 Remote control cable connecting the antenna to the handle (Fig.
3-15); after inserting and tightening the handle screw to the fork
connected to the antenna, connect the handle cable to the port
situated on the back of antenna labelled "REMOTE" (Fig. 3-15).
Fig. 3-15 – Connecting the remote control cable
 LAN cable connecting the PC to the DAD (Fig. 3-16); connect
the large LAN connector to the port on the DAD and the other
end to the smaller port on the back of the PC;
ANTENNA CABLE
CONNECTED TO DAD