Portable Media Player 512MB User’s guide
【Contents】 I. APPEARANCE LAYOUT ........................................................................................3 II. BASIC FUNCTION .................................................................................................4 B. VIDEO OPERATION ...............................................................................................5 C. VIDEO SUBMENU .................................................................................................6 D. AUDIO PLAYBACK .....................
I. Appearance Layout Name of the parts The UFD Picture Battery There are 3 levels of battery control The player is fully charged when the battery indicator is full. It will slowly decrease according to the battery storage. When the battery storage is nearly used up, it will indicate empty. Please recharge the battery.
II. Basic Function (a) Power on Under power off status, press the power on/off switch, the green indicator light on and the PMP start to work. The PMP will display the startup logo (one can select his favorite logo as the start up logo) first and then enters the main menu of the unit after 5 seconds. The player will go to main menu. (b) Power off Under power on status, press and hold power switch to power off. The PMP enters power off status after 2 seconds.
Files should be put under the specified catalogue, or they will not be identified by the PMP. Image (asf format) and picture files (jpg format) should be put in the folder “Removable disk/DCIM/100MEDIA”, the music files as MP3, WAV etc. should be put in the folder “Removable disk/MP3” It is all the same with SD/MMC card. (f) Charging Plug the charge into the power outlet and the plug its connector into the socket of the PMP. The PMP is been charging and the charging indicator light is green now.
2. After entering the video menu; if there is no video file in it, the display shows “No Video!” If it contains files, jog the direction key to select the video file you want to play and press “Shutter (OK)” key to start playback. 3. When playing, jog the direction key “ , ” to FR or FF; jog “+,-”to select the previous file or next file; press “ ” to pause and again to continue. 4.
When you want to save the file, any can’t be delete the file. Before you use this function, please select the video file which you want to save. 1. Select the file, which you want to protect. Press the direction ( , , +,-) button. 2. Press “Shutter (OK)” button to enter the submenu. 3. Press “+,-” button to select Protect, and press “ ” to open the menu. 4. Select the “Protected” and press “Shutter (OK)” button. 5.
to enter it. After entering the menu, the display shows “No Song!” if there is no audio files; if it contains files, press “+,-” button to select the song you want to playback, and press “Shutter” button to play it. (b) EQ Mode 1. Under the Video menu, press “Shutter (OK)” button to enter the submenu. 2. Press “ ” button to open menu, then press “+,-” to select the EQ mode which you want to choice. 3. There are 6 kinds EQ mode can choice, Classic, Pops, Rocks, Jazz, Bass, and Normal. 4.
the direction ( , , +,-) button. 2. Press “Shutter (OK)” button to enter the submenu. 3. Press “+,-” button to select Protect, and press “ ” to open the menu. 4. Select the “Protected” and press “Shutter (OK)” button. 5. If want to disable protect function, please select “Unprotect” and press “Shutter (OK)” button. When you choose the file to be protected, there will be a sing in left corner “ ”. (f) Delete 1.
E. Photo display Turn on the unit, it enters the main menu. Select “photo” interface by direction button and press “Shutter” button to confirm. After entering the photo menu, the display shows “No Image!” if there is no photo inside; if it contains photos, you can select them by direction ( , , +,-) button. After select the photo which you want to choose, press “Play” button to view the picture. (a) Protect When you want to save the file, any can’t be delete the file.
If the file is already protected, the screen will show “Protected”. Please careful use this function, the file which be deleted can’t be recovered. 5. Press “Shutter (OK)” button, all of the video files will be deleted. When choose “Delete One” or “Delete All”, press “M (Mode)” button will be canceling this function. (c) Slide Set 1. Press “+,-” to select “Slide Set”, and press “ ” to open menu. 2. This function can be set view picture time. 3. Press “ ” button to back the submenu.
(a) Press ‘+, -‘ button convert to Line-in mode. (b) When the record indication signal light, use AV cable to connect outside machine and PMP. (c) Press ‘play’ button to start record.Press ‘play’ again to pause. (d) Press ‘M’ button to exit.You can listen earphone simultaneously. Note: In AV in mode.Only earphone is valid. Select the right record mode to check the Audio/Video file. Please enter the Video/Audio interface. Note: 1. Confirm the outside Video/Audio signal out 2.
play. (d) Press “M” button to exit. C. Memory This function use to check the capacity automatically. And the balance (a) Select the memory menu. (b) Press the “Shutter” button can display the balance capacity (c) If plug in SD/MMC CARD, will check the card firstly. (d) If want to check the internal capacity information. You must convert to internal capacity D. Calendar This machine support calendar function.
4. Press “+,-” to change. Press “Shutter” button and exit. (b) Speaker 1. You can set the build-in speaker on or off. Set the beep sound on or off. 2. You can select through “+,-” Press “Shutter” to confirm and exit. (c) Language 1. Enter the language. 2. This machine support Chinese/English. 3. You can select through “+,-” Press “Shutter” to confirm and exit. (d) Storage 1. Enter the storage. 2. You can find Nand flash/SD card/PC-DEVICE. You can convert storage. 3. But don’t increase together.
1. You can recover original setting by this function. 2. You can select through “+,-” Press “Shutter” to confirm and exit. Note: This function will reset all settings. (g) Auto power off This function means that the machine can power off automatically when stand-by status. The power off time can be set “Never power off, 3 minutes, 15 minutes, and 30 minutes”. Press “Shutter” button to confirm and exit. The user can select according your requirement. (h) Format storage 1.
2. Press “Shutter” to listen the radio what you want to listen. (d) Volume 1. Press “+,-” to select the volume. 2. Press “ , ” to adjust the volume. VII. CAMERA Select the camera menu and then press “Shutter” to enter. (a) Zoom in/out When photo, can zoom in/out through “ , ”. (b) Light/contrast Press “+,-” can control the Light/contrast. Press ‘ok’ to photo. (c) Picture effect Press the “EQ” can select color. Sephia, B&W, Negative effect.
VIII. DV Select the DV menu and Press “OK”. When display show time, it starts to photo.Press ‘play’ to finish and save. (a) Zoom in/out When confirm photo. Press “ , ” can zoom in/out picture (b) Light/Contras Press “+,-” can control the Light/contrast. Press “OK” to photo. (c) Picture effect Press the “EQ” can select color, sephia, B&W, Negative effect. (d) Night view Press “Play” button can convert to night view. (e) Press “M” to return main-menu All pictures can be showed in photo.
B. Operate “CONVERT” 1. Select “MEDIA MODE”. 2. Select the sample rate 8K.16K. This will play in the PMP relatively. 3. Select the Input file. 4. When conversation is finished, STOP and EXIT button are workable. Note: conversation of CD & image are same to above. Just choose “CD MODE” or “IMAGE MODE”. For ASF conversation tool, please confirm you have stall following software: (a) Windows Media Player 10.0 version or above (b) Microsoft Directx9.
D. PMP upgrade Please copy the data in PMP before updating. Or we will not take responsibility for any data loss. (a) Install operation system (CD driver). (b) Put the CD driver into CD-ROM of computer, open the file of “CA536_Driver”, operate the file of “CA536_Driver\Windows Install Driver\Setup.exe”. 1. Press Next 2. B. Press Next 3. Press finish. Upgrading is successful now. It is better to restart the computer. (c) Uninstall operation system 1. In system of 98, 98SE, ME, 2000, XP.
2. Or [start]→[system]→[Sunplus Spca536] →[uninstall] (d) Upgrade the system inside of PMP Note: Before upgrade the system inside of PMP, pls install the operation system of PMP (includes IN ME, WIN2000, and WIN XP system). Or you cannot upgrade. 1. Format: open PMP & choose SET UP menu, then choose FORMAT to process on. Before format, please take out SD/MMC card, and copy the data in PMP. 2. Storage: after formatting, choose “STORAGE”, then choose “PC-DEVICE”, press “OK” to confirm. 3.
3. Press “YES”. 4. When upgrade is successful, following interface will show. Separate PMP & computer 30 seconds later.
X. Trouble Shooting (a) Cannot turn on PMP Check the battery is OK or dead. (b) No sound or listen to distortion sound during repeat. Ensure the volume is not in “0” state. Ensure there is MP3,ASF file stored in PMP. Ensure earphone connect well. Some damage MP3 or WMA file may cause static, even the music cannot be played. Please ensure the file is complete. (c) Abnormal letter shown in screen Ensure you choose the right language (d) FM cannot work well. Earphone can be use as antenna.
XI. Attachment Some lyric you cannot download from website or cannot find LRC format. You need to edit the lyric yourself. (a) Load on http://www.skycn.com/, download lyric edit software “Lyrics Power” (b) If your computer has no “WINAMP” player, please download. (c) Please open “Lyrics Power” to edit lyric, following the steps XII. Technical specification PMP size 92*60*17mm Display 2.5”TFT USB USB2.
