Datasheet

Search mode
Select Search mode icon at the FM mode menu, and then press Mode to enter Search mode interface.
Freq Mode function
Push Last/Next button and the player forward or backward single step 100KHZ to manual search
station Push on Last / Next button for about 2 seconds, and the player scans forward or backward per
100KHz, and stops at the scanned station. If you want to stop scanning, push Pre / Next switch to
stop.
Search station function
If the player exist more than one station, Pushed Pre/Next button to listen to the station.
Auto Search function
When selecting Auto search function, the player can auto scanned frequency between 87.5MHZ and
108MHZ and save to scanned station
Search level
There has eight grade, Auto search starch station demand to signal intensity more high when the grade
more high
Save
Save station is manual scanned in sequence, US Band and Japan Band can save maximum 20
stations respectively.
Delete
Delete station is exit
Select band
At the FM submenu, select the icon and press Mode button to enter the Select band interface, then push
Next button to choose US Band (FM87 - 108MHz) or Japan Band (FM76-90MHz), again press Mode
button to confirm finally.
FM REC type
In the FM tune, choose the icon of “Fine Rec”/”Long Rec” and press “MODE”. Long press MODE to save
the recording file.
FM Delete.
1. At Stop Interface. No Stop Interface exists at FM Mode.
2. Press Mode to enter Stop Submenu.
3. Press Next/Pre to select “Delete” or “Delete All”.
4. Short Press Mode to enter Delete Interface.
5. Press Mode to confirm and deletion starts.
8. Browse of JPEG
a. File selection:
Enter the file selection
Press the “play” button and browse JPEG