User Guide

Loading the Roll

Loading the Ribbon

Note: lease reer to indos drier installaon in iT ser anual.
1.Press to open the printer cover and
mechanism.
2.Pull the roll holders open and place
the roll between them.Press down the
locking tab.
3.Pass the labels through label guides
and adjust label guides to label’s width.
1.Install the ribbon module. 2.Insert the le part of supply spindle
and then the right part spindle.
3.Press down the printer mechanism.
6.Press down the mechanism and close
the cover.
4.Insert the le part of rewind spindle
and then the right part.
5.Wind the core 2~3 ciPress down the
mechanism and close the cover.
3.Connect the other end of power cord to the outlet.
2.Connect the power cord to AC adapter.
1.Connect the AC adapter to power receptacle.
Varies by regions
Ribbon Supply Spindle
Ribbon Rewind Spindle
Sckup
Poer Connecon
Cauon: the tear bar
of this printer contains
a sharp edge. Please
do NOT touch it.