User Manual

7
change the camera mounting location
2. No picture
(1) Pairing information is missing or wrong, please re-pair.
(2)Out of range, the wireless signal is blocked too badly or
poor signal, please add an antenna extension cable or change
the camera mounting location.
(3) Please check low voltage red light blinking(flash)
indicator, please charge first!
4. Freezes and disconnects / Unstable / static video
(1)Out of range, Please add an antenna extension cable or
change the camera mounting location.
(2)The wireless signal is blocked too badly or poor signal,
please add an antenna extension cable or change the camera
mounting location.
5. Fuzzy picture,Not clear
(1)Please remove the camera lens protector to get best
picture quality after install.
(2) Please check whether wipe off the camera lens.
6. The mounted camera slides or falls
Please check whether remove the film from the camera base,
7. for the plastic/aluminum/glass/wood surface
Please use the mount metal plates with strong adhensive,
Notes:It takes 72 hours to reach the best effect after pasting.
FAQs
Q:Battery life
A:charged time:8 hour(80%), daytime continuous work
time:18 hours,night continuous work time:15 hours,cold
weather will consume power a little faster.
Q:How to check the camera turn-on/turn-off mode?
A:Please check after short press the power button, turn-on
mode when the red led is on status ,turn-off mode or drain
battery when the red led is off status.
Q:How to check whether the camera is draining the battery ?
A: the 4 leds of the camera are always off by long press the