User Manual

5
Left(frontview),Right(rearview) flip image
3. ParkingLine setting:
Press “ParkingLine ” button, parking line setting on/off.
4. Camera pairing:
Long press the "Pairing" button on the panel to enter the
pairing state (the state lasts for 10S) and display “pairing”
(as shown in the figure below). In the pairing state, interrupt
the power supply of the camera and re-power it, It will show
a text“Successfully Pairing”, or will show “Pairing Fail”
means failure to pair, needs to pair again;
5.Support camera charge methods:
CAR charge cable/USB charge cable/power cable.
6.Test signal strength:
Put the monitor and the camera at the intended position to
test signal strength.
WIRING DIAGRAM
SPECIFICATION &
DIMENSION
Wireless camera
Sensor
1/2.7” Color CMOS
Resolution
1280x720P
System
P/N auto
Viewing Angle
120˚
Night Vision
4 infra-red lights