User's Manual

83
Figure 122 Card jam in Laminator 2
B. Card jam in Laminator 2
Please pull out the film cartridge as Figure.
Figure 123 Card jam in Laminator 3
C. Card jam in the Laminator 3
If laminating film is stuck to card or coiled on
rollers as Figure, the film cartridge may not be
pulled out easily. In this case, please cut the
laminating film or slowly pull out the film
cartridge while pressing the “” or “” button
on the control panel of Laminator little by little.
Figure 124 Card jam in Laminator 4
D. Card jam in Laminator 4
To remove a jammed card in laminator, please
press the “” button on the control panel of
Laminator until the jammed card is completely
ejected.