User's Manual

74
Figure 98 Modules of SMART-70 System (Printer, Flipper)
4.3.2 Module Firmware Upgrade
After clicking the tab of the combined modules of SMART-70 System such as “Printer [ 0 ]” or
Flipper [ 0 ]”, please click “Browse” and search and select the new firmware for the module. After
selecting the new firmware, “Manual Update” and “Update” is activated. Please click “Update” for
automatic firmware upgrade, and the Printer is automatically rebooted after firmware upgrade.
(Caution. Please do not do another job until the firmware upgrade is successfully completed and
do not turn off the Printer.)
Figure 99 Ready for firmware upgrade
In case there is some problems in automatic firmware upgrade, please click “Manual Update” to
manually upgrade firmware. According to the pop-up window as below figure, firmware can
manually be upgraded by clicking “Transfer” after the Printer is manually turned on and off.