User's Manual

Figure 95 CardPrinter70Test

① Select Printer: To select a Printer for test. In the picture. “IDP SMART-70 Card Printer” is the

connected Printer’s name, “SMART” is the connected Printer’s ID and “USB006” is the

connected port.

② Basic Control: To execute basic functions of Printer (Card In/Out, Print Head Up/Down, etc.).

③ Print: To print a CSD file which is designed by SMART Design.

④ Batch Job: To execute the job of ⑤ repeatedly.

⑤ Monitor: To check the working status of sensors and motors.

⑥ Printer Status: To check the status of Printer.

⑦ Message: To display messages when this utility is run.

4.2.1 Printer selection and basic control

When CardPrinter70Test is run, Printers connected via USB are automatically searched and can be

selected by priority. After setting "Allow Network Printer", all Printers connected via USB and

network can be selected. Other Printer can be selected by using pull-down menu. When a printer

is connected to this utility, the basic control, print and monitor can be tested.

The basic control functions will be provided later.

①

③

④

⑤

⑦

②

⑥