User's Manual

61
Figure 88 CardPrinter70Setup Log-in
Password input window is displayed when you run
this program. If the correct password is inputted,
the recorded setup values in SMART-70 Printer are
shown and the setup values can be adjusted.
The password for SMART-70 Printer is saved to
the SMART-70 Printer. When the SMART-70
Printer is connected to another PC, the saved
password in the SMART-70 Printer is required to
run this utility and adjust the Printer setting.
(Since there is no default password in SMART-70
Printer, please click “OK” if password have never
been set.)
Figure 89 CardPrinter70Setup Start
When you are successful to login, the basic setup
of Printer is shown as Figure 89.
4.1.2 Basic Setup
The basic setup of CardPrinter70Setup shows the firmware version, serial number and etc. of
the connected SMART-70 Printer, frequently used setting values (printing position, density and
etc.) can be adjusted.