User's Manual

56
Figure 80 Laminating settings
3.1.6 Laminating settings
This tab will be created only when SMART-70
Laminator module is connected.
Do Laminating: To set whether laminate
or not.
Laminator Side: To set the laminating side of
card (top, bottom and both sides).
Overlay: To set whether overlay panel is
printed or not. Default is no overlay when the
card is laminated. We recommend no overlay
when the card is laminated.
Figure 81 Encoding settings
3.1.7 Encoding settings
This tab will be created only when SMART-70
Magnetic Encoding option is installed.
Do Encoding: To set whether encoding or not.
Module: To set whether the internal module
(Printer) or the external module (Encoding
Station) is used.
Coercivity: To set the type of the magnetic
stripe cards for encoding.
LoCo: 300, 600 Oe.
HiCo: 2760 Oe.
SpCo: 4000 Oe.
Auto: Automatic encoding depending on a
used magnetic stripe card type.
Option: To set the encoding direction
(Forward / Backward / Bitmode).
Encoding: To set the encoding protocol
(ISO / Bally’s).
Mag Flip R/W: To set the encoding side of
magnetic stripe card.