User's Manual

54
> Black Dots: All black dots are extracted.
> Not Use: No extraction.
 Rewritable Controls: This property is only for rewritable printer.
- Erase Density [0:100]: To set the temperature to erase the contents on rewritable card.
 Wait Option: This option can set the card’s waiting time at each encoding position when the
smart card is encoded without using SDK. One contactless smart card encoder can be installed
into SMART-70 Printer. One contactless and one contact smart card encoder can be installed
into SMART-70 Encoding Station.
When this option is set and the SDK is not used for encoding, the program which the smart
card is recognized and encoded within the specified waiting time must be developed by
yourself because the card is only waiting for a specified time at the encoding position.
- Wait at Internal Module Contactless Encoding Position [On/Off]: To set that the contactless
smart card is waiting at the contactless smart card encoding position in Printer.
- Wait at External Module Contactless Encoding Position [On/Off]: To set that the
contactless smart card is waiting at the contactless smart card encoding position in Encoding
Station.
- Wait at External Module Contact Encoding Position [On/Off]: To set that the contact smart
card is waiting at the contact smart card encoding position in Encoding Station.
> Card Side [Front/Back]: To set the direction of card when the card is waiting.
> Wait Position [-100:100]: To adjust the card position from the previous waiting position of
card to the left or the right (unit is 0.1mm).
> Wait Time [0:1000]: To set the waiting time of card (unit is a second).