User's Manual

53
3.1.3 Advanced setup
For Advanced setup, please click the “Advanced” button on “Printing Preferences” window and you
can adjust the advanced setting.
 Reset Default Values: Advanced setting is reset to the default values.
 Color Correction: Adjusting gamma value of each color panel can change color sense. The
higher gamma value is the darker color. The absolute printing density can be adjusted by using
“CardPrinter70Setup” utility.
- Main [-100:100]: To adjust the gamma values of all panels.
- Yellow [-100:100]: To adjust the gamma value of the yellow panel.
- Magenta [-100:100]: To adjust the gamma value of the magenta panel.
- Cyan [-100:100]: To adjust the gamma value of the cyan panel.
- Black [-100:100]: To adjust the gamma value of the resin black panel.
- Overlay [-100:100]: To adjust the gamma value of the overlay panel.
 Position Processing: The printing position between panels can be adjusted. If the value is
higher, the positions are more accurate but the color sense may be a little lower.
- Color [-32:32]: To adjust the printing position of the color panels (yellow, magenta and cyan).
- Mono [-32:32]: To adjust the printing position of the resin black panel.
- Overlay [-32:32]: To adjust the printing position of the overlay panel.
 Resin Black (K) Processing: The method to extract the data to be printed by the resin black is
specified.
- Text [0:100]: To set the density criteria for extracting the text to be printed by the resin black.
- Dot [0:100]: To set density criteria for extracting the pixels to be printed by the resin black.
- Threshold [0:100]: To set density criteria for printing by the resin black when the dithering is
performed by using the Threshold.
- Dithering Degree [0:100]: To set sharpness when the dithering is performed by using the
Random.
- Resin Extraction: Method to extract the data for the resin black.
> Black object: Text, line, etc. Black objects are extracted.
> Black Text: Text is only extracted.